Operating instructions

6
Information
english
Operating, safety, and servicing instructions
Please read this operating, safety, and servicing instructions carefully before using
the pipe saw. Also store this instruction book somewhere accessible to everyone
using the pipe saw. In addition to these instructions, always follow the offi cial work,
health and safety regulations. The Exact PipeCut is meant for professional use only.
Technical data
Model Pipecut 280/PipeCut 360E
Voltage 1 230V-240 V / 50-60 Hz also 110V-120V / 50-60 Hz
Power 1750 W
No-Load speed I (low) = 2900 /min, II (high) = 3900 /min
Intermittent operation 2,5 min ON / 7,5 min OFF (S3 25% 10 min)
Blade diameter 165 mm (6,50”)
Mounting bore 62 mm (2,44”)
Weight 280E 9,0 kg (20 lbs)
Weight 360E 14,5 kg (32 lbs)
Range of use Ø 280E 40 mm – 280 mm (1,6”- 11”)
Range of use Ø 360E 75 mm – 360 mm (3,0”- 14”)
Max. pipe wall steel 10 mm (0,4”)
Max. pipe wall plastics 38 mm (1,5”)
Protection class
/ II
Spindle lock Yes
Speed preselection Yes
Constant electronic control Yes
Overload Protection Yes
Reduced starting current Yes
Vibration 2,84 m/s
2
LpA (sound pressure) 90,6 dB(A)
KpA (
sound pressure uncertanity) 3 dB(A)
LWA (acoustic power) 103,6 dB(A)
KWA (
acoustic power uncertanity) 3 dB(A)
The values given are valid for nominal voltages [U] of 230/240V. For lower voltage and models for
specifi c countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the
individual machines may vary. Only for power tools without reduced starting current: Starting cycles
generate brief voltage drops. Interference with other equipment/machines may occur in case of
unfavourable mains system conditions. Malfunctions are not to be expected for system impedances
below 0.36 ohm.