User's Manual
Exalt Communications Inc.
EX-2.4i Installation and Maintenance Manual
Page 8
MAN-002400, Revision 001
2005-12-01
2.2.2 Canada
The EX-2.4i operates under RSS-210 of Industry Canada regulations. Operation is subject to the
following conditions, unless express permission is granted by Industry Canada to operate in a
different manner:
• External amplifiers may not be used to boost the power, or to overcome transmission
system losses, unless the specific amplifier/cable/antenna combination has expressly been
authorized by Industry Canada.
• Cross-border transmissions are expressly prohibited, except with written permission from
both Industry Canada and the governing body of the neighboring country (FCC for USA)
• Only parabolic dish antennas or directional flat-panel antennas may be used. No other
types of antennas (omni-directional, yagi, etc.) are authorized. Parabolic dishes of either
grid or solid type are allowed. Maximum gain of each type of antenna allowed is:
o Parabolic Dish: 30.3 dBi (6-foot diameter)
o Directional Flat Panel: 20.5 dBi (~2-foot square)
A complete list of allowed antennas can be found within the Industry Canada regulatory
statement at the front section of this manual.
• Maximum transmit power (Pmax) based on Industry Canada EIRP regulations is
unlimited.