User's Manual

ManualsBrandsExalt Wireless ManualsElectronicsDigital Microwave Radio

Exalt Communications Inc.

EX-2.4i Installation and Maintenance Manual

Page 29

MAN-002400, Revision 001

2005-12-01

4. Set DS3 Line Code, 1.4.1.4.4, [setDS3code A:B:H]

(A=AMI, B=B3ZS, H=HDB3)

5. Display All Interface Configuration, 1.4.1.5

2. System Configuration, 1.4.2, <configsys>

1. Transmit Power, 1.4.2.1, <pwr>

1. Display Transmit Power, 1.4.2.1.1, <disppwr>

2. Set Transmit Power, 1.4.2.1.2, [setpwr xx] (power in dBm)

2. RF frequency, 1.4.2.2, <freq>

1. Display Frequency, 1.4.2.2.1, <dispfreq>

2. Set Frequency, 1.4.2.2.2, [setfreq xxxx] (frequency in MHz)

3. RF Bandwidth, 1.4.2.3, <bw>

1. Display RF Bandwidth, 1.4.2.3.1, <dispbw>

2. Set RF Bandwidth, 1.4.2.3.2, [setbw xx] (bw in MHz)

4. Modulation, 1.4.2.4 <mod>

1. Display Modulation, 1.4.2.4.1, <dispmod>

2. Set Modulation, 1.4.2.4.2, [setmod 1:2:3] (1=QPSK, 2=16QAM,

3=64QAM)

5. External Synchronization, 1.4.2.5, <sync>

1. Display External Sync Status, 1.4.2.5.1, <dispsync>

2. Enable External Sync, 1.4.2.5.2, [setsync on:off]

6. TDD Frame Size, 1.4.2.6, <frame>

1. Display Frame Size, 1.4.2.6.1, <dispframe>

2. Set Frame Size, 1.4.2.6.2, [setframe 1:2:3:4]

7. Link Security Code, 1.4.2.7, <code>

1. Display Link Security Code, 1.4.2.7.1, <dispcode>

2. Set Link Security Code, 1.4.2.7.2, [setcode xxxxxxxx]

8. External Input Alarm, 1.4.2.8, <alarm>

1. Display External Input Alarm, 1.4.2.8.1, <dispalarm>

2. Set External Input Alarm, 1.4.2.8.2, [setalarm Y:N O:C] (Y=

enable external alarm, N=disable external alarm,

O=normally open, C=normally closed)

9. Display All System Configuration, 1.4.2.9, <dispconfigsysall>

3. Administration, 1.4.3, <admin>

1. System Time and Date, 1.4.3.1, <time>

1. Display Time and Date, 1.4.3.1.1, <disptime>

2. Set Time and Date, 1.4.3.1.2, [settime yyyy mm dd hh mm ss]

2. Password, 1.4.3.2, <pw>

1. Monitoring Password, 1.4.3.2.1, <monpw>

1. Display Monitor Password, 1.4.3.2.1.1, <dispmonpw>

2. Set Monitor Password, 1.4.3.2.1.2, [setmonpw

xxxxxxxx]

2. Administration Password, 1.4.3.2.2, <adminpw>

1. Display Admin Password, 1.4.3.2.2.1, <dispadminpw>

2. Set Admin Password, 1.4.3.2.2.2, [setadminpw

xxxxxxxx]