User's Manual

Exalt Communications Inc.
EX-2.4i Installation and Maintenance Manual
Page 32
MAN-002400, Revision 001
2005-12-01
IC ID 6254A-102P40I
Emission Designator(s)
A-3 Interfaces
RF
Connector N-type Female
Impedance 50 ohms
T1/E1 (x4)
Connector RJ-45 (RJ48C), Female
T1 Impedance 100 Ohms, balanced
E1 Impedance 120 Ohms, balanced
T1 Line Codes AMI, B8ZS, selectable
E1 Line Codes HDB3
T1 LBO Settings (in ft.) 0-133, 133-266, 266-399, 399-533, 533-655
Loopback Modes Remote Internal, Remote External, Local Line
T1 Clocking Speed 1.544Mbps
E1 Clocking Speed 2.048Mbps
T1 Compliance ANSI T1.102-1987; ITU-T; G.823; GR-49T-CORE
E1 Compliance CEPT-1; G.703; ITU-T-G703
DS3
Connectors BNC Female
Impedance 75 ohms
Line Codes AMI, B3ZS, HDB3, selectable
DS3 LBO Settings (in ft.) 0-450, 450-900
Loopback Modes Remote Internal, Remote External, Local Line
DS3 Clocking Speed 44.736Mbps
Compliance ANSI T1.102-1993; T1.107
Ethernet
Connectors RJ-45, Female, auto-MDIX
Interface Speed 10, 100 or 1000BaseT
Duplex Half, Full, Auto, selectable
Compliance 802.3
Console (Serial)
Connector 9-pin Sub-D, Female
Interface Speed 9600 bps
Compliance EIA-574 DTE (RS-232)
Alarm
Connector 9-pin Sub-D, Female
Inputs (2) TTL
Outputs (2) Relay (Form C)
QPSK 16QAM 64QAM
8MHz
10M2W7D 9M9W7D 10M2W7D
16MHz
17M3W7D 19M0W7D 20M2W7D
32MHz
34M7W7D 36M0W7D 38M1W7D
64MHz
60M7W7D 61M3W7D 61M7W7D