User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 16
2007-06-25
Figure 1 EX-2.4i Digital Microwave Radio
The i-Series radios connect voice and/or digital data from one location to another,
obviating the need for copper or fiber connectivity, or enhancing existing connectivity by
providing a redundancy solution, a primary solution, and/or additional capacity.
The following models of radios are covered in this manual:
• EX-2.4i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 100Mbps (32MHz/Mode2)
• EX-2.4i-16, 10/100 Ethernet + 16xT1/E1
¶ Configured for 4xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 8xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 12xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 16xT1/E1, 200Mbps (64MHz/Mode2)
• EX-4.9i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 2xT1/E1, 27Mbps (10MHz/Mode2, 20MHz/Mode1)
¶ With license-key upgrade for 4xT1/E1, 55Mbps (20MHz/Mode2)
• EX-5i, 10/100 Ethernet + 4xT1/E1
¶ Configured for 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 200Mbps capacity (64MHz/Mode2)
• EX-5i-16, 10/100 Ethernet + 16xT1/E1
¶ Configured for 4xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 8xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 12xT1/E1, 100Mbps (32MHz/Mode2)
¶ With license-key upgrade for 16xT1/E1, 200Mbps (64MHz/Mode2)
Note: Not all software features mentioned in this document are
enabled on all radios with the current firmware releases. Please note the
revision history in the front section of the manual and check the Exalt
website download section to verify the most recent firmware release
available for your product.