User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 39
2007-06-25
LED Indicators
Table 3 provides details of the LED indicators on all models.
Table 3 LED indicators
Location/Label Type Function
LINK 3-color
LED
Indicates RF link status:
Green Solid = Error-free connection (BER<10e-6)
Yellow Solid = Errored connection (10e-3>BER >10e-6)
Red Solid = No link (BER>10e-3)
Red Flash= No remote information available (when RMT is
pressed and held)
Off = Improperly powered or fatal system failure
STATUS 3-color
LED
Indicates system status:
Green Solid = No alarm conditions (normal operation)
Yellow Solid = Alarm conditions, not traffic effecting
Yellow Slow Flash = In loopback (from this end)
Yellow Fast Flash = In loopback (at this end)
Red Solid = Alarm conditions; traffic effecting
Red Flash = No remote information available (when RMT is
pressed and held)
Off = Improperly powered or fatal system failure
RADIO A 3-color
LED
Indicates radio orientation:
Green Solid = Radio is configured as Radio A, based on software
setting
Green Flash = Radio is configured as Radio A, based on
temporary hardware configuration key
Off = Radio is configured as Radio B
ETHERNET
MAIN/AUX
Left Corner
Green
LED
Solid/Flashing = Data present
Off = No data present
ETHERNET
MAIN/AUX
Right Corner
Green
LED
Solid = Negotiated @ 100Mbps
Flash = Negotiated @ 10Mbps
Off = No connection negotiated