User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 57
2007-06-25
Figure 20 Radio Information page
Quick-Start
To establish a link on the bench, apply the following basic configurations to the radio
terminal. Use the steps in the Quick Start Guide included with the radio. A summary of
the items that need to be configured are:
• Radio IP address for each end.
¶ Each end must have a different IP address and cannot match the accessing
computer’s IP address or any address assigned if radios are part of a larger
network.
¶ It may be required to change the IP address of the accessing computer after
changing the IP address of the radio so that the IP subnet matches.
¶ The radio IP address is listed on the Administration Settings page.