User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 4
2007-06-25
Safety Notices
1. Review this entire guide for important installation instructions BEFORE attempting
to install this product.
2. This product is intended to be installed, used, and maintained by experienced
telecommunications personnel only.
3. Employ a properly licensed or authorized electrician to install or evaluate/certify the
installation of all power and grounding related to the use of this equipment and all
connected devices.
4. The device(s) shall only be connected to AC or DC sources within the device
specifications. Use a separate breaker circuit at the power source.
5. Lightning, surge protection devices, and earth grounding are required for most
installations to ensure human safety. Consult a qualified electrician.
6. Servicing of this device should be performed by authorized personnel only. Do not
disassemble this device. By opening or removing any covers you may expose
yourself to hazardous energy parts. Incorrect reassembly of this product can cause a
malfunction, and/or electrical shock, when the unit is subsequently used.
7. Do not connect or disconnect the power connection to the device when the power
supply is plugged into an AC outlet. To connect, first connect the power connection
to the device, and then apply power (or plug in) at the outlet. To disconnect,
disengage power at the outlet or unplug, and then disconnect the direct connection
to the device.
8. Do not insert any object of any shape or size inside this product at any time, whether
powered or not. Objects may contact hazardous energy components that could result
in a risk of fire or personal injury.
9. Liquids shall not come in contact with, or enter the inside of the device at any time.
10. Proper ventilation and/or airflow shall be provided surrounding the equipment. Do
not block any intake or exhaust vents. Items shall not come in contact with heat-
sinking materials. Ensure that ambient operational and storage temperature
specifications are maintained at all times.
11. Equipment is suitable for mounting on noncombustible surfaces only.
12. Do not move or alter the marking labels.
13. A CSU or similar isolating device is necessary between the equipment and the
public telecommunications network. The equipment has not been evaluated for
direct connection to the public telecommunications network.