User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 63
2007-06-25
sabotage by a party with the same radio model. Each link should have a unique
security key. If using the same security key for every link in the network, the radio
could link to any other radio with the same security key. This is problematic in multi-
radio networks.
¶ Note that the security key must be exactly 12 characters. Any printable ASCII
character can be used. The link security key is case sensitive.
Note: Changing the link security key interrupts transmission until the
opposite end is changed to match. Always change the far-end radio first,
and then change the near-end radio.
• Reset the admin and user passwords. These passwords should not match. If the admin
password remains at the factory default setting, it provides an opportunity for random
reassignment by a network-connected user.
¶ The new password must be entered twice: once in the main window and again in
the confirmation window. If the passwords do not match and the UPDATE button
is clicked, the password is not changed and remains set to the previous password.
• The License Key is set to all zeros. Enter the license key provided by Exalt to access
extended features or diagnostic capabilities. Click Update to accept the changes and
enable the new features. License keys are issued by radio serial number, so ensure
that the license key used was issued for this particular radio.