User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 70
2007-06-25
Figure 27 T1 Interface Configuration page (standard models)
E1 Interface Configuration Page
This page allows the administrator to enable/disable each individual E1 channel. The AIS
can also be enabled and disabled for each input. If enabled, the radio places an AIS code
on the output of the associated interface if and when the link fails or when there is no E1
signal available from the far end to provide the user at the local end. Loopback controls
are also provided (see T1/E1 Loopback on page 71).