User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 73
2007-06-25
File Transfer Page
This page allows the administrator to upload and download files to and from the radio.
Two types of files can be uploaded: configuration and radio firmware. When uploading
Configuration Files, current configuration parameters are immediately overwritten,
and the unit automatically reboots. When uploading radio firmware files, the file is
placed into reserve memory space. After the new radio firmware file uploads, use the File
Activation page to enable the files (see File Activation Page on page 76).
Up to three types of files can be downloaded: configuration, radio firmware, and MIB.
The MIB file refers to the Management Information Base related to the Simple Network
Management Protocol (SNMP) function, and is only available on models which support
SNMP. See Simple Network Management Protocol (SNMP)
on page 77 for more
information.
Note: Check the File Activation page before uploading radio firmware
files. New file uploads overwrite the secondary file location. If important
files reside in the primary or secondary file location, download them
before uploading the new files. Only the active radio firmware file can be
downloaded. Therefore, to download the reserve file, it must first be
activated (using the Swap button). See File Activation Page on page 76.
Figure 32 File Transfer Page