User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 74
2007-06-25
Use the following steps to download a file
1. Select the type of file to download (configuration or radio firmware)
2. Click the DOWNLOAD button and wait for the radio to prepare the file for
download.
For the MIB file download, a second page/link appears (Figure 33).
3. Right-click the link on the page to download the file to a desired location.
Figure 33 File Transfer page—download file link
File download and upload is useful when configuring several radios with similar settings.
A copy of the configuration file can also help restore radio settings. In addition, a copy of
the Exalt default configuration file is helpful to restore the radio to factory settings.
Note: Do not change the name of any downloaded file. The
configuration file must be named config.nv. To keep track of multiple
configuration files, use a folder naming system or temporarily rename the
file, however, it must be named config.nv it can be uploaded to a radio.
Never change radio firmware file names under any circumstances.
If copying the same configuration file into multiple radios, take as some parameters will
match and that may be undesirable. However, it may be easier to change just a subset of
parameters rather than every parameter.