User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 78
2007-06-25
Alarms Page
This page provides an easy-to-read summary of the alarm status of both local and remote
radios. The colors on this page reflect the color of the alarms displayed on the radio front
panel. However, additional detail displays on this page to aid in quick assessment of
issues and status.
Figure 35 Alarms page (standard models)
See Table 3 for more information on the front panel LEDs. This page displays additional
information about the alarm status.
The Internal Fan alarm monitors all three internal fans. The radio only requires that
one fan be operational for full-specification performance. The additional fans are
provided for redundancy and to increase overall reliability. If one or two fan alarms
are yellow or red, it is prudent to plan to install a spare radio at the earliest
opportunity and return the radio for repair (RMA authorization required). If all three
fans are in alarm, the radio must be taken out of service immediately, as damage may
occur to the internal electronics, especially in hotter environments or where thermal
exchange from neighboring equipment exists.