User Manual

Exalt Communications, Inc.
Exalt i-Series Installation and Management Guide
5000001 82
2007-06-25
• Maximum RSL indicates the best (highest) RSL that occurred since the last counter
reset. This indicates the best performance of the radio link, which is normally equal to
the installed value, and is usually the designed value.
• Time Since Reset indicates the amount of time passed since the last counter reset.
This helps to quantify the seriousness of other statistics, such as ES and Unavailable
Seconds, if there have been high numbers of ES and/or Unavailable Seconds over a
relatively short period of time.
Each end of the link statistics on this page can be independently reset using the Reset
Statistics button for the local or remote radio. It is good practice to reset the statistics at
the time that the link is commissioned (after all antenna alignment is complete and stable
RSL at designed levels is achieved, and no more system reboots are anticipated). Make a
habit of viewing this page regularly, make records of the performance, and reset the
statistics so that the counters can more precisely pinpoint issues.
Note: Resetting statistics from one end also resets the statistics for the
same radio at the opposite end. That is, if the Local statistics are reset,
logging into the remote end shows the Remote statistics on that end
(which is the local radio in the first condition) as being reset at the same
time.