User's Manual

Exalt Communications, Inc.
EX-5r Installation & Management
5000007 36
2006-05-17
default setting leaves an opportunity for anyone on the connected network to hack into
the radio and change settings.
o The system requires that you type the changed password twice, once in the main
window and once again in the confirmation window below. If the passwords do
not match, and the UPDATE button is pressed, the password will not change, and
will remain set to the previous password.
Figure 5-8: Administration Settings Page
5.7 System Configuration Page
The System Configuration Page allows adjustment of several critical system parameters.
Most of the entries on this page are self-explanatory. Unique or important items are listed below.
• Radio Transmit Power must be set to the designed level. The professional installer
shall set this value, or dictate the value of this setting to the system administrator per
the system design and local regulations. In many cases, the setting of this value must
be proper in order to comply with legal restrictions that apply to the use of this device.
Improper setting can result in liability to the user and/or installer.
Changing Radio Transmit Power may temporarily interrupt traffic. Small
changes in output power will normally not interrupt traffic, but larger changes may.
Do not adjust Radio Transmit Power to a value higher than is legally allowed. Do not
adjust Radio Transmit Power lower than the link budget and fade margin can afford.
The link may be lost and unrecoverable through GUI control. If the link is lost due
to reduction of Radio Transmit Power, travel to the radio location(s) may be required
to reset the value.