User's Manual

Exalt Communications, Inc.
EX-5r Installation & Management
5000007 40
2006-05-17
may be enabled/disabled for each input. If enabled, the radio will place an AIS code on the
output of the associated interface if/when the link fails or there is no T1 signal available from the
far end to provide the user at the local end.
Figure 5-11: T1 Configuration Page
5.9.2 E1 Configuration Page
The E1 Configuration Page allows the administrator to enable/disable each individual E1. Also,
AIS (alarm indication signal) may be enabled/disabled for each input. If enabled, the radio will
place an AIS code on the output of the associated interface if/when the link fails or there is no E1
signal available from the far end to provide the user at the local end.
Figure 5-12: E1 Configuration Page
5.10 File Transfer Page
The File Transfer Page allows the administrator to upload and download files to and from the
radio. Uploading files will place these new files in a reserve memory space. After files are
uploaded the File Activation Page is used to enable these files. Uploading files does not
automatically enable them.
It is advisable to check the File Activation Page before uploading new files. New
file uploads will over-write the secondary file location. If important files reside in