Manualshelf

Owner`s manual

ManualsBrandsexaSound ManualsMedia ConverterE20
11121314151617181920
Page | 15
4. Locate the exaSound Dashboard icon on the menu bar. The red exclamation mark indicates that the
USB cable is disconnected:
5. Connect the USB cable of the exaSound DAC. The red exclamation mark should disappear from the
exaSound Dashboard icon.
6. Power on the DAC. The red square overlay on the exaSound Dashboard icon indicates that the
device is On and in Stop mode. During playback the red square changed to a green triangle.
7. Click on the exaSound Dashboard icon and make sure that Core Audio is checked.
8. Go to Applications -> Utilities and open Audio MIDI Setup. Select the exaSound driver. By default the
driver is set to 2-channel (Stereo) mode.