See Better with Smart Light Installation and Operating Manual DHJSBM242322LALXXX DHJSBM2346BLALXXX DHJSBM2836BLALXXX DHJSBM4024BLALXXX Website: https://www.allsumhome.com/ DHJSBM2346FLALXXX DHJSBM2836FLALXXX DHJSBM4024FLALXXX Email: info@exbriteusa.
See Better with Smart Light WARNING AND SAFETY INSTRUCTIONS Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use. WARNING Risk of Fire and Electric Shock All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
See Better with Smart Light TOOLS YOU MAY NEED CHECK PRODUCT LIST AFTER OPENING THE PACKAGE LED Lighted Mirror Screws for wall Type A Plastic Anchor Type B Plastic Anchor Mounting bar Installation Manual ‐‐1 ‐‐5 ‐‐5 ‐‐5 ‐‐1 ‐‐1 pce pcs pcs pcs pce pce INSTALLATION MANUAL 1 Level and mark the location. 2 Place the mounting bar against the wall and make some marks on the wall. 3 Website: https://www.allsumhome.com/ Drill the holes and place the suitable plastic anchors.
See Better with Smart Light 4 5 Screw the mounting bar onto the wall with the screws . Connect the mirror with the main supply. We provide plug with mirrors. Optional to cut the plug directly,then connect to electrical wiring if using wall switch. ATTENTION: PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING! 6 Website: https://www.allsumhome.com/ Hang the mirror onto the mounting bar. Email: info@exbriteusa.
See Better with Smart Light OPERATION INSTRUCTION ON/OFF and CCT adjustment ON/OFF button Button turns blue when connected to main supply. Button always on as long as connecting to main supply. Short‐touch the button to turn on/off the mirror. Adjusting color temperatures (CCT) between warm white and cool white by long‐touching the button for seconds. Finish setting by withdrawing your finger when the color reaches the one you need.
See Better with Smart Light Night Light Clock/Temperature Turn off the light to set the clock. Long touch button 1or 2 for seconds,the Hour will flash, then short‐touch button1 and 2 to set Hour. Wait for seconds after setting up the Hour, then it will automatically switch to the Minute flash. Short‐touch button 1and 2 to set up the Minute. Wait seconds after you finish the time setting,the time will be saved automatically.