Installation Guide

INSTALLATION PROCESS
X1
X3
X3
110VAC
Anti-fog
pad
OutputInput
Power Source:
Constant 110AC
power
Output
Dimmer Switch
12V LED Light
110VAC -12VDC
LED
driver
110VAC
Anti-fog
pad
OutputInput
Power Source:
Ceiling/Vanity
Light controlled by
a non-dimmable
switch on the
wall.
Output
Dimmer Switch
12V LED Light
110VAC -12VDC
LED
driver
110VAC
Anti-fog
pad
OutputInput
Power Source:
Ceiling/Vanity
Light controlled
by a non-
dimmable
swithc On/
the wall.
Output
Bypass built-in
touch dimmer switch
12V LED Light
110VAC -12VDC
LED
driver
110VAC
Anti-fog
pad
OutputInput
Power Source:
Ceiling/Vanity
Light controlled
by a dimmable
swithc On/
the wall.
Output
Dimmer Switch
12V LED Light
110VAC -12VDC
LED
driver
Warning:Always switch off the
electrical supply at the mains during
installation and maintenance.
Do not switch on the electrical
supply at the mains until the end of
the installation.
E486300
Wall-mounted installation
Step 1: Mark the position of the hanging screw.
Step 2: fix the screw.
Step 3: hang up the LED mirror on the wall
Floor type installation
Step 1: Open the floor stand.
Step 2: Connect the plug wire to the hard wire.