Size:148x210mm 36＂Fan Ceiling User manual WYJSFL3602ACBXE26 120 V~ 60 Hz 34 W (MOTOR) 3xE26 25 W Max.
............................................... SAFETY TIPS ............................................... OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED 'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS(15.9 KG) OR LESS' AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE.
................................................ PARTS LIST ................................................ 1 # Description 1 . . . . . . . . . . . . Mounting Bracket 2 . . . . . . . . . . . . Downrod 3 . . . . . . . . . . . . Canopy 4 . . . . . . . . . . . . Canopy Screws 2 3 4 5 5 . . . . . . . . . . . . Coupling Cover 6 . . . . . . . . . . . . Clamp pin 7 . . . . . . . . . . . . Cross pin 8 . . . . . . . . . . . . Fan Motor Assembly 9 . . . . . . . . . . . . Light kit 10 . . . . . . . . . . .
................................................ FEATURES .................................................. DOWNROD INSTALLATION For normal ceilings ............................... PREPARING FOR INSTALLATION ............................... 2 1 Unpack and inspect fan carefully to be certain all contents are included. Use metal outlet box suitable for fan support (must support 35 lbs).
..MOUNTING BRACKET INSTALLATION .. ........ MOUNTING OPTIONS ........ 4 3 Choose a MOUNTING OPTION 1 NORMAL DOWNROD OPTION If installing downrod supplied with fan, proceed to page 7, step 5. Install mounting bracket (1) to outlet box in ceiling using the screws and washers provided with the outlet box. ................................ NORMAL DOWNROD OPTION ................................ 6 5 2 1 1 2 3 3 Remove clamp pin (1) and cross pin (2) from fan motor assembly (3).
.................................. NORMAL DOWNROD OPTION .................................. 7 2 3 1 Feed motor lead wires through downrod/canopy assembly and insert downrod into downrod yoke. Make sure to align hole in downrod with the hole in downrod yoke. Install yoke cross pin (1) through yoke and downrod. Insert clamp pin (2) into cross pin until it snaps into place. Tighten set screws (3) in yoke. ............... MOUNTING ............... ... SAFETY CABLE INSTALLATION ...
............ WIRING OPTIONS ............ ................ MOUNTING ................ 10 1 BB 11 2 N Make wiring connections from the house and the fan to the remote receiver (2) as shown. Connect using wire nuts (1) (provided). Make sure that all exposed wiring is secured inside wire nuts. Refer to Point 3 of Safety Tips on page 2. ..................................... Once wiring step has been completed, slide the wired remote receiver in between the bracket and the top of the downrod ball.
................................ LIGHT FIXTURE INSTALLATION ................................ 13 White Blue 1 Remove the three mounting screws for the light kit pan identified . Make wiring connections from the fan motor assembly to the light kit as shown. Connect using wire nuts (1) (provided).Make sure that all exposed wiring is secured inside wire nuts. 15 14 Install light bulbs (not included). Install the 3 screws removed from the light kit pan (step # 13) into the closed hole in the light kit.
................................ LIGHT FIXTURE INSTALLATION ................................ 16 Remove the 4 fixing screws from the light kit pan. Keep them for next step. The metal cage has 4 slots. Raise up the metal cage by aligning the 4 slots to the 4 round holes from the light kit pan. Install the 4 screws removed previously into the round holes of the light kit pan and tighten all 4 screws securely. ......................... BRACKET OF TRANSMITTER INSTALLATION ........................
........................... HOW TO OPERATE YOUR CEILING FAN ........................... 23A 12V - + Restore electrical power to the outlet box by turning on the electricity at the main fuse box. To make the fan operational, open battery door by pressing and sliding down the battery door. Install a 23A 12V batteries into the hand-held remote transmitter(if not used for long periods of time, remove the batteries to prevent damage to the transmitter). 1.
.......................................... REMOTE CONTROL The remote buttons function as follows: 1 1. Turn On the fan and contrd the speed MED LOW 2 3 LIGHT ON/OFF HI STOP LOW = low speed MED = medium speed HI 2H 4 .......................................... 1H 4H 8H .......................................... = high speed 2. Light On/Off - Press and release 3. Fan Stop - Press and release 4. Fan timer function 1H = 1hour 2H = 2hours 4H = 4 hours 8H = 8 hours. MAINTENANCE ............
TROUBLESHOOTING GUIDE If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this trouble shooting chart. If a problem cannot be remedied, please consult with your authorized qualified and do not attempt any electrical repairs yourself. TROUBLE SUGGESTED REMEDY 1. If fan does not start: 1.
