Use and Care Manual

Carefully unpack and remove the components of the following 5 boxes - that make up a complete Excalibur Router

Table - and check for damaged or missing items as per the list of contents below.

NOTE: Please report any damaged or missing items to your General International distributor immediately.

UNPACKING (CNT’D)

Model 40-100C:

LIST OF CONTENTS QTY

a- 16” X 27” CAST-IRON TABLE (#40-070) . . . . . . 1

b- HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

- LEVELER SCREW . . . . . . . . . . . . . . . . . . . . . . 10

- FLAT WASHER. . . . . . . . . . . . . . . . . . . . . . . . . . 4

e- LOCK WASHER . . . . . . . . . . . . . . . . . . . . . . . . 4

f- HEX SOCKET CAP SCREW . . . . . . . . . . . . . . . 4

Model 40-100P:

LIST OF CONTENTS QTY

a- 15 3/4” X 25 5/8” PHENOLIC TABLE (#40-043) 1

- HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

- LEVELER SCREW . . . . . . . . . . . . . . . . . . . . . . 10

d- FLAT WASHER. . . . . . . . . . . . . . . . . . . . . . . . . . 4

e- LOCK WASHER . . . . . . . . . . . . . . . . . . . . . . . . 4

f- HEX SOCKET CAP SCREW . . . . . . . . . . . . . . . 4

Model 40-100M:

LIST OF CONTENTS QTY

a- 15 3/4” X 25 5/8” MDF TABLE (#40-047) . . . . 1

b- WOOD SCREW . . . . . . . . . . . . . . . . . . . . . . . 10

c- WOOD NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

d WOOD SCREW . . . . . . . . . . . . . . . . . . . . . . . 26

Mounting hardware for #40-047 - MDF table (for model 40-100M)

ADDITIONAL REQUIREMENTS FOR SET UP

• Extra person for help with lifting

(cast-iron table)

• Straight edge

• Phillips screwdriver

• Socket wrench set

• Wrench set

• Allen key set

Mounting hardware for #40-043 - Phenolic table (for model 40-100P)

Mounting hardware for #40-070 Cast-iron table (for model 40-100C)

Additional hardware is supplied with the cast–iron table to allow for

installation on a table saw as part of kit #40-070EK. Complete mount-

ing instructions for the 40-070EK can be downloaded at the General

International website at: www.general.ca/manuals