Technical data

21
NEW EXCALIBUR
English
O
CORRECT PROCEDURE OF
DECOMPRESSION
• Insert the gun clamp (O1).
WARNING :
If the equipment is still under pressure after per-
forming the operations above described because
of the nozzle or the flexible hose clogged, proceed
as follows:
• Loosen very slowly the gun nozzle.
• Release the clamp.
• Point the gun into the container of the product
and press the trigger to release pressure.
• Loosen very slowly the fitting of connection
from the flexible hose to the gun
.
• Clean or replace the flexible hose and the
nozzle.
• Move the switch (O2) to the OFF position to stop the equip-
ment.
• Reduce pressure to the minimum (turn counterclockwise the
pressure control knob (O3)).
• Disconnect the power supply cable (O4).
• Release the gun clamp (O1), point the gun into the tank of
the product and press the trigger to release pressure. At the
end of the operation, insert the gun clamp.
• Open the recirculating-safety valve (O5) to release the residual
pressure always clockwise.
O4
O1
OFF
O2
O5
O3
Clamp inserted
Clamp released