Technical data

3
NEW EXCALIBUR
English
TOP FINISH
version
A
“Top Finish” version.
“Top Finish” version allows to choose between Airless and
Mistless painting.
The machine works with basic system Mistless and to choose the
airless system it is necessary to close the air supply and replace
the type of spraying gun.
Lacquer
Waterborne
Acrylic
Primer
Enamels
Fixative
Paints
Emulsions
Impregnants
Antirust
Primer
FRAME mounted
TROLLEY mounted
WORKING PRINCIPLE
The NEW J11
EXCALIBUR unit is defined “electric piston pump”.
An electric piston pump is used for high pressure painting without
air (from this process derives the term ”airless”).
The pump is controlled by an electric motor coupled with a re-
duction gear.
A cam shaft and a connecting rod allow to obtain the reciprocating
motion necessary to the working of the “pumping group” piston.
The piston movement produces a “vacuum”.
The product is sucked, pushed towards the pump outlet and then
sent to the gun through the flexible hose.
A electronical device on the side of the reduction gear casing,
allows to adjust and control the pressure of the material coming
out of the pump.
When the pump reaches the set value, the motor stops and starts
again when the value decreases.
A safety valve avoiding overpressure, guarantees the total reliability
of the equipment.
Indoor
Outdoor
Industrial buildings
Industrial constructions
Redeveloping
Roofing
Fields of application Applications materials