Use and Care Manual

Reverse teeth at the bottom of the blades prevent
splintering to the underside of the workpiece.
Regular evenly spaced tooth pattern. Considered the most common of scroll saw blades, they are available in
the widest range of sizes and provide a good combination of fast cutting action with good chip clearance
and a relatively smooth finish.
#2/0 .022 .010 28
#0 .024 .011 25
#2 .029 .012 20
#4 .035 .015 15
#5 .038 .016 12.5
#6 .041 .016 12.5
#7 .045 .017 11.5
#9 .053 .018 11.5
#11 .059 .019 9.5
#12 .062 .024 9.5
For extremely intricate sawing.Very tight cuts in 1/16” - 1/4”
wood veneer, plastic, hard rubber, pearl, etc.
For tight radius work with thin materials, 3/32” - 1/2” wood
veneer, wood, bone, fiber, plastic, etc.
For close radius work in materials 1/8” or thicker. Good for
sawing hard and soft woods, bone, horn, plastic, etc.
Popular sizes for cutting hard and soft woods, 3/16”
up to 2”. Also cuts plastic, paper, felt, bone, etc.
SKIP TOOTH
REVERSE TOOTH
Same
applica-
tions as
Skip Tooth
blades.
BLADE WIDTH THICKNESS TEETH/INCH
#2/0R .026 .011 28/20
#2R .029 .012 20/13
#5R .038 .016 12.5/9
#7R .049 .018 11.5/8
#9R .054 .019 11.5/8
#12R .062 .062 9.5/6
12
B
LADE
WIDTH THICKNESS TEETH/INCH
Fast, clean cutting and very efficient
chip clearance.
DOUBLE TOOTH
Same
applica-
tions as
Skip Tooth
blades.
BLADE WIDTH THICKNESS TEETH/INCH
#1D .026 .013 30
#3D .032 .014 23
#5D .038 .016 16
#7D .044 .018 13
#9D .053 .018 11
#12D .061 .022 10