Operating instructions

Step 1
Connect power cord into back of unit and plug in to power source.
Step 2
Turn power switch on from back of unit.
Step 3
Default temperature is set to Fahrenheit (F). To select Celsius (C), press the “Start” key and the
“Time Subtract” key simultaneously for two seconds.
Step 4
Set temperature & time. Press temp key once to change by 1° increments or “press and hold”
for rapid change. Press time key once to change by 1 minute increments or “press and hold”
briefly for 15 minute increments. Continue to “press and hold” for rapid hour change.
Step 5
Press START to begin
Step 6
Press STOP to end or cancel program.
ONE TIME / ONE TEMPERATURE CYCLES Operating Instructions
RESET