RES10 www.ExcaliburDehydrator.
IMPORTANT SAFEGUARDS When using electrical appliances, these basic safety precautions should always be followed. 1. Read all instructions. Save these instructions. 2. Do not touch hot surfaces. 3. To protect against electrical hazards do not immerse any part of the dehydrator, cord, or plug in water or other liquid. 4. Close supervision is necessary when any appliance is used near children. Keep the appliance and the cord away from children under the age of 8 years old. 5.
The Excalibur RES10 offers you many settings options to make the dehydration process suitable for your specific needs. With the RES10: You can set the timer in 1 minute increments from 1 minute to 99 hours and 59 minutes. You can also set one temperature for one time period and a second temperature for another time period. Excalibur refers to this as two-time / two-temperature.
UNDERSTANDING THE SETTINGS: 1 time / 1 temperature Set zone A for 1 time and 1 temperature. OR Set zone B for 1 time and 1 temperature OR Set zone A+B for 1 time and 1 temperature. 2 time / 2 temperature This setting is most often used to speed up the drying process, decreasing the total drying time. How is this possible? By setting a period of time at a higher temperature and a period of time at a lower temperature, the drying process is faster. Set zone A for 2 time and 2 temperature.
FUNCTIONS and CONTROL PANEL: The POWER switch is on the back of the machine. Use this to turn the power ON/OFF. > next to a word selection indicates the menu selection title you are choosing. CONTROL PANEL takes you back to the previous menu is the Enter or Set button takes you back to the HOME Screen (Dry It and My Recipes) takes you to My Recipes (i.e.
SETTINGS : Temperature Units, Button Feedback, Display Brightness, Factory Settings Press the to: 1) Set or change the temperature unit to Fahrenheit or Celsius. Default setting is Fahrenheit. 2) Set or change the button feedback setting. Options include: Beep + Haptic vibration Beep Only None 3) Adjust Display Brightness 4) Reset to Factory Setttings To change TEMPERATURE (Fahrenheit or Celsius): Press > Temp Units, press . Select Temp Units Screen will appear.
SETTING the DEHYDRATOR: WELCOME & HOME Screen: 1. Plug electrical cord into back of unit. 2. Then plug electrical cord into electrical outlet. 3. With the front of the unit facing you, reach to the LEFT, top, back side of the unit. 4. Flip the power switch to on. 5. The Welcome screen will appear. 6. A few seconds later, the HOME Screen will appear with 2 options: > Dry It My Recipes SETTING 1 time / 1 temperature Set zone A for 1 time and 1 temperature.
After you choose the ZONE, the next screen will show you the Remaining Time and Set Temperature. At any time during the drying process, you can move the cursor to change the time or temperature. If you choose CANCEL SESSION, next screen lets you confirm yes or no. SETTING 2 time / 2 temperature This setting is most often used to speed up the drying process, decreasing the total drying time, by setting a period of time at a higher temperature and a period of time at a lower temperature.
To START the drying process, press the on the control panel. The selection will move to > Start. Press . After you press START, select the zone you want to set. Press the or on the control panel to scroll thru the options. When the > is on the zone you want, press to selection. Zone A only (top 5 trays), zone B only (bottom 5 trays) or zone A+B (all 10 trays). After you choose the ZONE, the next screen will show you the Cycle 1's Remaining Time and Set Temperature.
After you set Zone B's temperature, you will scroll down to either > EDIT Zone A or > Start. To START the drying process, have the selection > Start. Press . The drying process will begin and the next screen will look like this: NOTE: will light when both A & B zones are running. To check if a Zone is in the 1st cycle or 2nd cycle, scroll to have the > next to the specified Zone or light to indicate cycle.
To START the recipe, have > next to START and Press . The dehydrator will start running. Next screen will look something like this, depending on the recipe settings: TROUBLE SHOOTING GUIDE All Excalibur® Dehydrators are checked before shipping for electrical or mechanical problems.
One side of my drying trays seems to be dried before the other. What should I do? Because your dehydrator may dry one side faster than the other, halfway through the drying cycle you may want to turn the trays 180º. This may speed up the dehydration process and will reduce energy consumption. My apples and pears have darkened to a rusty-brown color while drying. Are they safe to eat? Yes. Fruits that have turned brownish color are safe to eat.