Use and Care Manual

After you set Zone B's temperature, you will scroll down to either > EDIT Zone A or > Start. To START the drying process, have the
selection > Start. Press .
The drying process will begin and the next screen will look like this:
NOTE:
will light when both A & B zones are running.
To check if a Zone is in the 1st cycle or 2nd cycle, scroll to have the > next to the specified Zone or light to indicate cycle.
MY RECIPES
To EDIT or CREATE A NEW recipe,
Make sure the > is next to the recipe you want to edit or create new. Press .
have > next to EDIT and Press .
 > EDIT NAME to edit the name. Press on the right menu.
1. Press again or to move the cursor to the recipe letters.
2. Press the or to scroll thru the alphabet. Use the and to move the cursor left or right. To completely
remove a letter or space press .
3. Press when name is complete.
4. > will then appear next to DONE
5. > DONE. Press to save this recipe.
> EDIT SETTINGS to edit the settings of time, temperature, and zones. Follow the instructions in the previous section of the manual
for 1 time / 1 temp, 2 time / 2 temp, or 2 zone.
After you select > SAVE RECIPE, select the zone you want to save it as.
Most often for "My Recipes" you will select the full chamber (zone A + B).
STARTING or EDITING a Recipe Already Saved from MY RECIPES:
From the initial screen: Scroll down to > MY RECIPES. Press .
Or at any time press on the right menu.
The MY RECIPES screen will appear and these two icons will light:
Press and to scroll to the recipe you are wanting to start or edit, then press on the right menu.
This screen will now show the recipe name at the top and options for START or EDIT.