Specification Sheet

XLERATOReco
®
HAND DRYER
TECHNICAL DATA SHEET
MODELS: XL -
BW W GR C SB SI SP - ECO
OPTIONS: -1.1N (Noise Reduction Nozzle)
-VOLTAGE (See Chart) -H (HEPA Filter)
EXCEL DRYER, Inc. Phone [phone] [e-mail]
East Longmeadow, MA Fax [phone] www.exceldryer.com
2017
FEB
16ECT0004
PERFORMANCE
CONSTRUCTION
A. All covers will be fastened to a base plate by two chrome plated tamper-proof bolts.
Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib-reinforced, lightweight,
unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or
finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel covers using
patented Kolorfusion Sublimation Decoration process.
B. Base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the bottom one is
suitable for use with surface conduit.
C. All internal parts shall be coated according to Underwriters' Laboratories, Inc.
requirements.
D. Entire mechanism shall be internally grounded.
E. Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from the air stream.
1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air deflection
noise but increases dry time by approximately 3 seconds.
F. Accessories (optional)
Microban
®
Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S (Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502
MECHANISM
A. Motor shall be a thermally protected, series commutated, through-flow discharge
vacuum motor/blower (
5
/8 hp / 20,000 rpm) which provides air velocity of up to
19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4
inches [102 mm] below air outlet). Includes a washable metal mesh filter for more
reliable performance.
B. Control assembly is activated by an infrared optical sensor located next to the air
outlet. The dryer shall operate as long as hands are under the air outlet. Control
includes a speed and sound control mechanism and a filter sensor which is activated
should the filter become clogged. There is a 35-second lockout feature if hands are
not removed. Sensor equipped with externally visible Red LED light that can flash
error codes to assist in troubleshooting.
LIMITED WARRANTY
The dryer shall be guaranteed to be free from defects for a period of five (5) years.
Warranty shall include labor performed at factory as well as the repair or exchange of
defective parts, at manufacturer's option.
QUANTITY RECOMMENDATIONS
One dryer for every two washbasins is sufficient for most applications. If restroom traffic is
unusually heavy, we suggest one dryer per washbasin in small installations and two dryers for
every three washbasins in larger installations. When a 54" washfountain is used, we suggest
four to five dryers.
XL-C-ECO
Chrome
Plated
XL-GR-ECO
Graphite Textured
Painted
XL-W-ECO
White Epoxy
Painted
XL-SB-ECO
Brushed Stainless
Steel
XL-SI-ECO
***
Custom Special
Image
XL-SP-ECO
**
Custom Special
Paint
XL-BW-ECO
White Thermoset Resin (BMC)
G
r
e
e
n
e
r
P
r
o
d
u
c
t
C
E
R
T
I
F
I
E
D
RoHS
Wattage: 425 Watts - 530 Watts
DRY TIME: 10 SECONDS*
ENERGY PER USE: 1.7 Wh*
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
FOR ARCHITECT/ENGINEER APPROVAL
* Dry time and energy use testing performed by SGS International on standard XLERATOReco Hand Dryer
with 0.8" nozzle to 0.25g or less of residual moisture, pursuant to the UL Environment Global Product
Category Rules (PCR) for Hand Dryers.
** Special Paint powder-coated covers are available in many colors and textures.
*** Exclusive digital image technology allows for the addition of company, school or team logos with any color,
design or a 'green message'.
Certifications:
UL Environment published the first global Product Category Rules (PCR) for
Hand Dryers and Excel Dryer is proud to have been selected to chair the
project. The PCR created evaluation methods through industry consensus
that compare products' environmental impact and performance. Third party
testing results then enable specifiers and buyers to make a true apples-to-
apples comparison of products and more informed decisions.