XLERATORecoTechSheet

XLERATOReco
®
HAND DRYER
TECHNICAL DATA SHEET
MODELS: XL -
BW W GR C SB SI SP - ECO
OPTIONS: -1.1N (Noise Reduction Nozzle)
-VOLTAGE (See Chart) -H (HEPA Filter)
EXCEL DRYER, Inc. Phone [phone] [e-mail]
East Longmeadow, MA Fax [phone] www.exceldryer.com
2015
DECEMBER
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
FOR ARCHITECT/ENGINEER APPROVAL
PERFORMANCE
A. Dry Time: 12 Seconds
*
B. Wattage: 425 Watts - 530 Watts
C. Certifications:
CONSTRUCTION
A. All covers will be fastened to a base plate by two chrome plated
tamper-proof bolts.
Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib-reinforced, lightweight,
unbreakable, rustproof and all exposed surfaces shall be bright chrome
plated or finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel
covers using patented Kolorfusion Sublimation Decoration process.
B. Base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the
bottom one is suitable for use with surface conduit.
C. All internal parts shall be coated according to Underwriters'
Laboratories, Inc. requirements.
D. Entire mechanism shall be internally grounded.
E. Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from
the air stream.
1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air
deflection noise but increases dry time by approximately 3 seconds.
F. Accessories (optional)
Microban
®
Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S
(Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502
MECHANISM
A. Motor shall be a thermally protected, series commutated, through-flow
discharge vacuum motor/blower (
5
/8 hp / 20,000 rpm) which provides
air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet
and 16,000 LFM at the hands (4 inches [102 mm] below air outlet).
B. Control assembly is activated by an infrared optical sensor located next
to the air outlet. The dryer shall operate as long as hands are under
the air outlet. Control includes a speed and sound control mechanism
and a filter sensor which is activated should the filter become clogged.
There is a 35-second lockout feature if hands are not removed. Sensor
equipped with externally visible Red LED light that can flash error codes
to assist in troubleshooting.
LIMITED WARRANTY
The dryer shall be guaranteed to be free from defects for a period of five (5)
years. Warranty shall include labor performed at factory as well as the repair or
exchange of defective parts, at manufacturer's option.
QUANTITY RECOMMENDATIONS
One dryer for every two washbasins is sufficient for most applications. If restroom
traffic is unusually heavy, we suggest one dryer per washbasin in small installations
and two dryers for every three washbasins in larger installations. When a 54"
washfountain is used, we suggest four to five dryers.
XL-C-ECO
Chrome
Plated
XL-GR-ECO
Graphite Textured
Painted
XL-W-ECO
White Epoxy
Painted
XL-SB-ECO
Brushed Stainless
Steel
XL-SI-ECO
***
Custom Special
Image
XL-SP-ECO
**
Custom Special
Paint
XL-BW-ECO
White Thermoset Resin (BMC)
G
r
e
e
n
e
r
P
r
o
d
u
c
t
C
E
R
T
I
F
I
E
D
RoHS
*
Dry time based on third party testing performed by SGS International on standard
XLERATOReco
®
hand dryer with 0.8" nozzle to 0.2g or less of residual moisture.
**
Special Paint powder-coated covers are available in many colors and textures.
***
Exclusive digital image technology allows for the addition of company, school or team logos
with any color, design or a 'green message'.