XLERATORTechSheet

EXCEL DRYER, Inc. Phone [phone] [e-mail]
East Longmeadow, MA Fax [phone] www.exceldryer.com
2015
DECEMBER
XLERATOR
®
HAND DRYER
TECHNICAL DATA SHEET
MODELS: XL -
BW W GR C SB SI SP
OPTIONS: -1.1N (Noise Reduction Nozzle)
-VOLTAGE (See Chart) -H (HEPA Filter)
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
FOR ARCHITECT/ENGINEER APPROVAL
PERFORMANCE
A. Dry Time: 10 Seconds
*
B. Wattage: 1490 Watts (Heat On) - 425 Watts (Heat Off)
C. Certifications:
CONSTRUCTION
A. All covers will be fastened to a base plate by two chrome plated tamper-proof bolts.
Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib-reinforced, lightweight,
unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or
finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel covers using
patented Kolorfusion Sublimation Decoration process.
B. Base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the bottom one is
suitable for use with surface conduit.
C. All internal parts shall be coated according to Underwriters' Laboratories, Inc.
requirements.
D. Entire mechanism shall be internally grounded.
E. Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from the air stream.
1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air deflection
noise but increases dry time by approximately 3 seconds.
F. Accessories (optional)
Microban
®
Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S (Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502
MECHANISM
A. Motor shall be a thermally protected, series commutated, through-flow discharge
vacuum motor/blower (
5
/8 hp / 20,000 rpm) which provides air velocity of up to
19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4
inches [102 mm] below air outlet).
B. Heating element (970 w) is constructed of Nichrome wire and mounted inside the blower
housing, thereby being vandal resistant. It shall be protected by an automatic resetting
thermostat, which shall open whenever air flow is cut off and shall close when flow of
air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C)
ambient room temperature at the hands (4 inches [102 mm] below air outlet).
C. Control assembly is activated by an infrared optical sensor located next to the air outlet.
The dryer shall operate as long as hands are under the air outlet. Control includes a speed
and sound control mechanism, variable heat control with High, Medium, Low and Off
settings and a filter sensor which is activated should the filter become clogged. There is
a 35-second lockout feature if hands are not removed. Sensor equipped with externally
visible Red LED light that flashes error codes to assist in troubleshooting.
LIMITED WARRANTY
The dryer shall be guaranteed to be free from defects for a period of five (5) years.
Warranty shall include labor performed at factory as well as the repair or exchange
of defective parts, at manufacturer's option.
QUANTITY RECOMMENDATIONS
One dryer for every two washbasins is sufficient for most applications. If restroom traffic is
unusually heavy, we suggest one dryer per washbasin in small installations and two dryers for
every three washbasins in larger installations. When a 54" washfountain is used, we suggest
four to five dryers.
G
r
e
e
n
e
r
P
r
o
d
u
c
t
C
E
R
T
I
F
I
E
D
RoHS
XL-C
Chrome
Plated
XL-GR
Graphite Textured
Painted
XL-W
White Epoxy
Painted
XL-SB
Brushed Stainless
Steel
XL-SI
***
Custom Special
Image
XL-SP
**
Custom Special
Paint
XL-BW
White Thermoset Resin (BMC)
*
Dry time based on third party testing performed by SGS International on standard
XLERATOR hand dryer with 0.8 nozzle to 0.2g or less of residual moisture.
**
Special Paint powder-coated covers are available in many colors and textures.
***
Exclusive digital image technology allows for the addition of company, school or team
logos with any color, design or a 'green message'.