Manual

ManualsBrandsExcel ManualsPressure WasherOfficial Excel power washer

Pressure Washer

Record All Information and attach sales

receipt here for future reference:

Purchase Date:

Operation D'dilanuam

for model XR2600

Serial #:

Do Not return this product to the retailer!

Questions? 1-800-888-2468

Learn more about your pressure washer,

get answers to frequently asked questions,

and register on line at

www, excellpressurewasher, com

Table of Contents

Safety Guidelines/Definitions .............................2

Consumer Saftey Information ............................2

Important Safety Instructions .....................2-5

Carton Contents ...................................... 6

Assembly Instructions ..................................6

Operating Instructions ....................................7-11

Maintenance .................................................12

Storage ............................................................13

Trouble Shooting Guide ................... 14-I5

Warranty .............................................................................16

Espa_ol .......................................................................17-32

Frangais ...................................................33-48

IMPORTANT

Please make certain that the person who is to use this equipment carefully

reads and understands these instructions before operatin#

Part No. A12335 Rev. 0 05/18/05

Summary of content (16 pages)

PAGE 1
® Pressure Record All Information and attach sales receipt here for future reference: Operation Washer D'dilanuam for model Purchase Date: XR2600 Serial #: Do Not return this product to the retailer! Questions? 1-800-888-2468 Learn more about your pressure washer, get answers to frequently asked questions, and register on line at www, excellpressurewasher, com Table of Contents Safety Guidelines/Definitions Consumer Saftey Information Maintenance ............................. 2 .................
PAGE 2
Thismanualcontainsinformation thatis importantforyouto knowandunderstand, Thisinformationrelatesto protectingYOURSAFETYandPREVENTING EQUIPMENT PROBLEMS.. Tohelpyourecognize thisinformation, weusethesymbolsbelow.Please readthemanualandpayattentiontothesesymbols. or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
PAGE 3
_RISK OF EXPLOSION WHAT • OR FIRE (continued) CAN HAPPEN HOW TO PREVENT Materials placed against or near the pressure washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials. Muffler exhaust heat can damage painted surfaces, melt any material sensitive to heat (such as siding, plastic, rubber, or vinyl), and damage live plants..
PAGE 4
HAZARD RISK TO FLUID INJECTION WHAT CAN HAPPEN HOW TO PREVENT IT Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury,. Leaks caused by loose fittings or-worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately! o Never place hands in front of nozzle..
PAGE 5
_RiSK OF UNSAFE WHAT CAN a HAZARD OPERATION HAPPEN HOW TO PREVENT Unsafe operation of your pressure washer could lead to serious injury or death to you or others. IT o Do not use chlorine bleach or any other corrosive compound. o Become familiar with the operation and controls of the pressure washer. ° Keep operating area clear of all persons, pets, and obstacles . Do not operate the product when fatigued or under the influence of alcohol or drugs,.
PAGE 6
Operation Manual Engine © Chemical Hose Nozzle Cleaning Tool Nozzle Holder Quick Connect Frame and Engine Manual Wheei Assembly card I Registration Bagged Spray High Pressure Hose Nozzles I Pa_s Gun Handfe Quick Connect Spray Wand Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place, 5_ Remove connect bag and grommet NOTE: to match five colored quick nozzles from plastic insert them into correct on th
PAGE 7
Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Spray Gun High Pressure Quick Connect Spray Wand High Pressure Pump (located inside the shroud) Engine BASIC ELEMENTS OF A PRESSURE WASHER BASRC ELEMENTS ENGINE High Pressure Pump (located inside the shroud): Increases the pressure of the water supply. Refer to the engine manual for location and operation of engine controls. Engine: pump.
PAGE 8
Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled. Allowing the unit to run for more than two minutes without the gun trigger pulled could cause overheating and damage to the pump.
PAGE 9
TO USE SPRAY WAND The nozzles for the spray wand are stored in nozzle holder on the panel assembly, Colors on the panel identify nozzle location and spray pattern° See chart to choose the correct nozzle for the job to be performed° CHANGING WAND NOZZLES ON SPRAY Risk of Flying Object could cause risk of serious injury. DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles. 1. 2. Pull quick connect and insert nozzle.
PAGE 10
HOW TO APPLY CHEMICALS STARTING AND CLEANING Prior to starting, refer to your engine manual for proper starting procedure. SOLVENTS Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use_ Do not use bleach. To Apply 1. Press chemical hose onto pump as shown Place other end of chemical hose with filter on it into container 4. outdoor 2. Check engine oil level. See Engine Owners Manual for correct procedure. 3.
PAGE 11
8. Start engine. See Engine Owners Manual for correct procedure. NOTE: When engine rope is pulled, pressure starts building in the gun. If the engine does not start after two pulls, pull the gun trigger to relieve this pressure° 9. Depress trigger on gun to start water flow. NOTE: Stand on a stable surface and grip gun/spray wand firmly with both hands. Expect the gun to kick when triggered, 10. Release flow. trigger to stop water 11. Adjust nozzle spray for the task being performed.
PAGE 12
When perlorming maintenance_ you may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death! 1 Disconnect the gun. the spray wand from 4. Remove the high-pressure nozzle from the spray wand. Remove any obstructions with the nozzle cleaning toot provided and backflush with clean water: To ensure efficient operation and longer life of your pressure washer; a routine maintenance schedule should 5.
PAGE 13
ENGINE 5. Consult the Engine Owners Manual the manufacturer's recommendations for comes out of high pressure connection of pump. for storage. PUMP The manufacturer recommends using a pump protector/winterizer, such as EXA80, when storing the unit for more than 30 days and/or when freezing temperatures are expected, If a pump protector/winterizer is not available, *RV antifreeze needs to be run through the pump as outlined in the steps below. 6. Remove garden inlet of pump,, 7.
PAGE 14
CAUSE PROBLEM Engine will not start (see Engine Manual for further engine troubleshooting) CORRECTION No fuel Add Fuel. Pressure builds up after two pulis on the recoil starter or after initial Squeeze gun trigger to relieve pressure,, use_ Choke lever in the "No Choke" 3osition Move choke to the "Choke" position. Spark plug wire not attached. Attach spark plug wire,. Engine ON!OFF switch in OFF )osition,.
PAGE 15
PROBLEM CAUSE CORRECTION Spray wand not in low pressure° See How to Use Spray Wand paragraph in the Operation Section.. Chemical filter clogged,, Clean filter. Chemical screen not in cleaning solution. Make sure end of chemical hose is fully submerged into cleaning solution, Chemical too thick. Dilute chemical Chemical should be the same consistency as water. Pressure hose is too long Lengthen water supply hose instead of high pressure hose. Chemical build up in chemical injector.
PAGE 16
DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer" application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase All products covered by this limited warranty which are used in commercial applications (i..e.