Manual

HAZARD
RISK TO FLUID INJECTION
WHAT CAN HAPPEN
Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious injury,.
Leaks caused by loose fittings or-worn
or damaged hoses can result in injection
injuries. DO NOT TREAT FLUID INJECTION
AS A SIMPLE CUT! See a physician
immediately!
Injuries can result if system pressure is not
reduced before attempting maintenance or
disassembly
o
o
o
o
6
HOW TO PREVENT IT
Never place hands in front of nozzle..
Direct spray away from self and others_
Make sure hose and fittings are tightened
and in good condition. Never hold onto the
hose or fittings during operation..
Do not allow hose to contact muffler:
Never attach or' remove wand or hose
fittings while system is pressurized.
• To relieve system pressure, shut off
engine, turn off water supply, and pull gun
trigger until water stops flowing..
• Use only hoses and accessories rated
for pressure higher than your pressure
washer's PSI.
HAZARD
_RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
o Spray directed at electrical outlets or ° Unplug any electrically operated product
switches, or objects connected to an before attempting to clean it. Direct spray
electrical circuit, could result in a fatal away from electric outlets and switches.
electrical shock..
HAZARD
RiSK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product..
HAZARD
RISK OF INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING OR STORING
WHAT CAN HAPPEN
Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil
leaks will damage carpet, paint or other"
surfaces in vehicles or trailers.
HOW TO PREVENT IT
tf pressure washer is equipped with a
fuel shut-off valve, turn the valve to the
off position before transporting to avoid
fuel leaks If pressure washer is not
equipped with a fuel shut-off valve, drain
the fuel from tank before transporting,
Only transport fuel in an OSHA approved
container. Always place pressure washer
on a protective mat when transporting to
protect against damage to vehicle from
leaks,. Remove pressure washer from vehicle
immediately upon arrival at your destination.
A12335 4- ENG