Manual

Engine Frame and
Wheei Assembly
High Pressure
Hose
Operation
Manual
Engine
Manual
©
Chemical Nozzle
Hose Cleaning
Tool
I Registration I
card
Nozzle
Holder
Quick
Connect
Nozzles
Bagged Pa_s
Spray Gun
Quick Connect Spray Wand
Handfe
Place handle assembly onto frame,
depress the snap buttons, and
slide the handle assembly onto the
frame until snap buttons snap into
place,
¸ !i
2.
Attach high
pressure hose
to gun. Tighten
securely,
3. Connect wand to
gun. Tighten securely,,
4_ Place the nozzle holder onto
the panel (located on the handle
assembly) and push each nozzle
holder into place.
5_
Remove five colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder:
NOTE: Nozzles are color coded
to match colored nozzles on
panel.
NOTE: The pump on this unit is
maintenance free and requires no oil,
if there is a problem with the pump
contact an Authorized Service Center.
6. Use a tire pressure gauge to
check the tires pressure before
each use and while inflating
tires; see the tire sidewall for the
correct tire pressure. NOTE: Air
tanks, compressors, and similar
equipment used to inflate tires
can fill small tires similar to these
very rapidly. Add air-in small
increments and frequently use
the tire gauge to prevent over
inflation.
Risk of Bursting.
Over inflation of
tires could result in serious injury
and property damage,
A12335 6 - ENG