Manual

TO USE SPRAY WAND
The nozzles for the spray wand are
stored in nozzle holder on the panel
assembly, Colors on the panel identify
nozzle location and spray pattern° See
chart to choose the correct nozzle for
the job to be performed°
CHANGING NOZZLES ON SPRAY
WAND
Risk of Flying
Object could
cause risk of serious injury. DO
NOT attempt to change nozzles
while pressure washer is running.
Turn engine off before changing
nozzles.
1. Pull quick connect coupler back
and insert nozzle.
2. Release quick connect coupler
and twist nozzle to make sure it
is secure in coupler.
Risk of Flying
Object could cause
risk of serious injury. Ensure nozzle
is completely inserted in QC socket,
and QC snap ring is fully engaged
(forward) before squeezing gun
trigger.
Risk of injection or
injury to person.
Do not direct discharge stream
toward persons, unprotected
skin, eyes, or any pets or animals.
Serious injury can occur.
Nozzle Color Red
0o
_owerful
Uses pinpoint for
very intense
cleaning
Yellow Green White Black
...... i
15° 25° 40° low pressure
intense intense covers wide applies
cleaning of cleaning of areas of cleaning
small areas larger areas icteaning solutions
Metal or metal, Ilmetal' metal, metal,
concrete concrete, or lconcrete, or concrete, concrete,
wood, or
DO NOT use wood Jwood iwood, or vinyl v[ioy!
on wood ......
* The high pressure spray from your pressure washer is
capable of causing damage to surfaces such as wood,
glass, automobile paint, auto striping and trim, and delicate objects such as
flowers and shrubs. Before spraying, check the item to be cleaned to assure
yourself that it is strong enough to resist damage from the force of the spray.
9_ ENG A12335