ILLUSTRATED PARTS BOOK 3100 PSI Pressure Washer EPW2123100 MAT Industries, LLC, REV.
Table of Contents Unit Assembly................................................................................................................... 2-3 Engine…………………………………................................................................................. 4-15 Head Assembly................................................................................................................. 4 Crankcase.....................................................................................................................
Unit Assembly MAT Industries, LLC, REV.
Unit Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 KIT A KIT B KIT C DESCRIPTION Engine (See pages 4-15 for parts breakdown) Isolator, Engine Weldment, Lower Frame Screw, M6 x 1.0 x 16mm, Hex Head w/ Nylock Patch Lock Washer, M6 Washer, Flat, M6 Hook, Wand Tip, Excell Black Axle, Wheel Screw, M8 x 1.25 x 25mm, SHCS Isolator, Foot Washer, Flat, M8 Nut, M8 x 1.25, Hex Nylon Locking Wheel Screw, M8 x 1.25 x 45mm, Saddle Knob Nut, M8 x 1.
Head Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 DESCRIPTION Gasket, Cylinder Head Cover, Cylinder Head Gasket, Cylinder Head Cover Tube, Breather Screw Stud Stud Pin Screw Spark Plug Assembly, Cylinder Head Stud MAT Industries, LLC, REV. 20181207 -4- PART NO.
Crankcase REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 DESCRIPTION Assembly, Crankcase Sensor, Low Oil Assembly, Governor Gear Arm, Governor Plug, Drain Washer Bearing Seal, Oil Nut Washer, Governor Gear Pin Screw MAT Industries, LLC, REV. 20181207 -5- PART NO.
Crankcase Cover Assembly REF. NO. 1 2 3 4 5 6 7 8 DESCRIPTION Cover, Crankcase Bearing Seal, Oil Gasket, Crankcase Pin Dipstick, Oil Plug, Engine Oil Screw MAT Industries, LLC, REV. 20181207 -6- PART NO.
Camshaft Assembly REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DESCRIPTION Assembly, Camshaft Valve Seat, Valve Spring Clamp, Valve Lock Spring, Valve Guide, Seal Tappet, Valve Lifter, Valve Plate, Lifter Stopper Bolt, Valve Adjusting Rocker, Valve Nut, Valve Adjusting Nut, Valve Lock Kit, Valve (Includes #2-6) MAT Industries, LLC, REV. 20181207 -7- PART NO.
Recoil Starter REF. NO. 1 2 DESCRIPTION Bolt Assembly, Recoil Starter MAT Industries, LLC, REV. 20181207 -8- PART NO.
Lower Shield/Shroud REF. NO. 1 2 3 4 5 6 7 8 9 10 DESCRIPTION Shroud Shroud, Cylinder Body Shield, Lower Protector, Oil Switch, On/Off Screw Screw Collar Screw Screw MAT Industries, LLC, REV. 20181207 -9- PART NO.
Carburetor Assembly REF. NO.
Air Cleaner REF. NO. 1 2 3 DESCRIPTION Nut Assembly, Air Cleaner Element, Filter MAT Industries, LLC, REV. 20181207 - 11 - PART NO.
Muffler Assembly REF. NO. 1 2 3 4 DESCRIPTION Gasket, Muffler Assembly Nut Assembly, Muffler Cover, Muffler MAT Industries, LLC, REV. 20181207 - 12 - PART NO.
Fuel Tank Assembly REF. NO. 1 2 3 4 5 6 7 8 9 DESCRIPTION Tank, Fuel Strainer, Fuel Cover, Fuel Tank Outlet, Fuel Tank Oil Collar Tube, Fuel Screw Nut Jacket, Rubber MAT Industries, LLC, REV. 20181207 - 13 - PART NO.
Flywheel Assembly REF. NO. 1 2 3 4 5 6 DESCRIPTION Nut, Flywheel Pulley, Starter Impeller Assembly, Flywheel Screw Coil, Ignition MAT Industries, LLC, REV. 20181207 - 14 - PART NO.
Throttle Control Assembly REF. NO. 1 2 3 4 5 6 7 8 9 DESCRIPTION Assembly, Throttle Control Screw Spring, Governor Rod, Governor Spring, Throttle Valve Returning Bolt, Governor Support Nut Assembly, Governor Support Kit, Springs MAT Industries, LLC, REV. 20181207 - 15 - PART NO.
Pump Service Kits REF. NO. A B C D E DESCRIPTION Kit, Inlet Connection Kit, Inlet Screen Kit, Thermal Relief Kit, Oil Fill Breather Kit, Injection Stem MAT Industries, LLC, REV. 20181207 - 16 - PART NO.
Unit Decals REF. NO. DESCRIPTION Kit, Decal Sheet MAT Industries, LLC, REV. 20181207 - 17 - PART NO.
