User Manual Waterproof Weighing Scale ESW-E © Excell Precision Limited 2014. All rights reserved Worldwide. The information contained herein is the property of Excell Precision Limited and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied.
EXCELL PRECISION CO., LTD. Content of Table Instruction for Use................................................................................................................2 Preparing to Use the Scale ..................................................................................................2 Chapter 1 Introduction .........................................................................................................4 1-1 Features ................................................................
EXCELL PRECISION CO., LTD. Thank for your purchasing of our EXCELL Weighing Scale. To guide you to use our product correctly, please read this Manual carefully to extend the life of machine and to avoid error. Instruction for Use 1) Please keep the scale in a cool dry place. Do not store it at high temperature. 2) Avoid objects impacting with the scale. Do not drop loads onto the scale or subject the weigh pan to any strong shock loads.
EXCELL PRECISION CO., LTD. Due to the storage battery adopt the advanced free-maintaining technique, customers need not to replenish electrolyte. The scale should be recharged every 3 months to prevent failure of the internal rechargeable battery. 1. The battery should be charged for 8~10 hours. 2. The temperature of battery should below 45℃. Maintaining 1. Please do not discharge with over-current when using the battery. Please charge the battery after discharging current. 2.
EXCELL PRECISION CO., LTD. Chapter 1 Introduction 1-1 Features Sealed waterproof silica gel strip blocks water from infiltrating into the scale. Surrounded by waterproof grade sheeting to ensure the water free. 1/3,000~1/6,000 display resolution available. Aluminum frames coated with anti-corrosion treatment for longer lifespan. Stainless steel made feet and platter for anti-rust. High speed of 24bits AD fast reacts and shortens the weighing operation duration.
EXCELL PRECISION CO., LTD. 1-3 Power Supply Power Supply Selection 1. DC 6V / 4Ah rechargeable battery 2. AC 110V~240V (±10％) adapter Power Consumption 25 mA 35 mA 55 mA 70 mA (system + L/C + front display；Power saving mode) (system + L/C + front and back display；Power saving mode) (system + L/C + front display) (system + L/C + double display) Low Battery Warning Please note when the ( ) symbol keeps flashing on the display, the batteries should be charged.
EXCELL PRECISION CO., LTD. UNITS: switching units Press the UNITS key to switch weight units, the icons or arrows will indicate the active units as appropriate. The units available are dependent on the exact scale model. After power off, the scale will memorize the active units. When the scale is powered on again, it displays the previously active units.
EXCELL PRECISION CO., LTD. INTERNAL VALUE MODE (must hook up Load Cell to test) c Press TARE to enter, and the display shows internal value d Please check whether the internal value has changed obviously with weight changing. e Please check the backlight.
EXCELL PRECISION CO., LTD. Chapter 2 External Function Setting In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LCD shows .
EXCELL PRECISION CO., LTD. 2-1 General Function Setting There are 7 functions in the general function setting mode from to . Workflow of the General Function setting: DISPLAY ACTIONS NOTE ON/ZERO key ⇒ Upward key (from 0 to 9) UNITS key ⇒ Downward key (from 9 to 0) Press TARE key TARE key ⇒ Move the cursor to right NET/GROSS key ⇒ Move the cursor to left.
EXCELL PRECISION CO., LTD. 2-1-1 Power Saving Function Setting Select in the General Function setting mode saving function setting.
EXCELL PRECISION CO., LTD. 2-1-2 Automatic Power-off Timer Setting Select in the General Function setting mode automatic power-off timer setting.
EXCELL PRECISION CO., LTD. 2-1-3 Hi/Lo/OK Function Setting Select in the General Function setting mode to set the Hi/Lo/OK function. This function is available in all unit modes. In one specific unit mode, enter to set the Hi/Lo/OK values. ACTIONS NOTE DISPLAY When the high limit and low limit are both set as “0”, the Hi/Lo/OK function is disabled. ON/ZERO key ⇒ Upward key (from 0 to 9) UNITS key ⇒ Downward key (from 9 to 0) Press TARE key TARE key ⇒ Move the cursor to right .
EXCELL PRECISION CO., LTD. 2-1-4 Restore to the Default Setting Select the default setting.
EXCELL PRECISION CO., LTD. 2-1-5 Noise Filter Setting Select noise filter setting.
EXCELL PRECISION CO., LTD. 2-2 Weight Calibration In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LED shows to enter the weight calibration mode. NET/GROSS or UNITS key to select ACTIONS and uses the NOTE DISPLAY Press TARE key The LED displays the calibration weight value (the maximum capacity of 1st unit) and the unit. The digit on the right side keeps flashing. .
EXCELL PRECISION CO., LTD.
