User Manual Waterproof Weighing scale ESW © Excell Precision Limited 2014. All rights reserved Worldwide. The information contained herein is the property of Excell Precision Limited and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorized by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied.
EXCELL PRECISION CO., LTD. Table of Content INSTRUCTION FOR USE ...................................................................................................2 PREPARING TO USE THE SCALE .....................................................................................2 CHAPTER 1 INTRODUCTION ............................................................................................4 1-1 FEATURES AND SPECIFICATIONS....................................................................................
EXCELL PRECISION CO., LTD. Thank you for purchasing EXCELL waterproof weighing scale. In order to use the scale properly, please read this instruction carefully before use. If you have a problem concerning the scale, please contact your supplier. Instruction for Use 1. Please keep the scale in a cool dry place. Do not store it at high temperature. 2. Avoid objects impacting with the scale. Do not drop loads onto the scale or subject the weigh pan to any strong shock loads. 3.
EXCELL PRECISION CO., LTD. Due to the storage battery adopt the advanced free-maintaining technique, customers need not to replenish electrolyte. The scale should be recharged every 3 months to prevent failure of the internal rechargeable battery. 1. The battery should be charged for 8~10 hours. 2. The temperature of battery should below 45℃. Maintaining 1. Please do not discharge with over-current when using the battery. Please charge the battery after discharging current. 2.
EXCELL PRECISION CO., LTD. Chapter 1 Introduction 1-1 Features and Specifications Features: Sealed waterproof silica gel strip blocks water from infiltrating into the scale. Surrounded by waterproof grade sheeting to ensure the water free. 1/3,000~1/6,000 display resolution available. Aluminum frames coated with anti-corrosion treatment for longer lifespan. Stainless steel made feet and platter for anti-rust.
EXCELL PRECISION CO., LTD. 1-2 Power Supply Power Supply Selection 1. DC 6V / 4Ah rechargeable battery 2. AC 110V~240V (±10％) adapter Power Consumption 14mA (system no backlight；Single display) 19mA (system backlight；single display) about 275 hours about 200 hours Low Battery Warning Please note when the ( be changed. ) symbol keeps flashing on the display, the batteries should The scale will turn off automatically after a few hours when the low battery warning symbol shows up.
EXCELL PRECISION CO., LTD. 1. When the scale powers on if the weight is negative and after a container is placed on the weigh pan if the weight is still below zero. 2. The tare value is over the full scale capacity. UNITS KEY Press the UNITS key to switch weight units; the icons will indicate the active units. NET/GROSS KEY In the Tare mode, the screen displays the “TARE” icon; press the NET/GROSS key to switch between the “Net value” and the “Gross value”.
EXCELL PRECISION CO., LTD. SIMPLE COUNTING FUNCTION (1) Use the UNITS key to enter into the “PCS” mode (2) Press the NET/GROSS key to select the counting sample size (S = 10, S = 20, S = 50, S = 100, S=200). , , , , in order. The LCD shows (3) Put the samples on the weigh pan and press the UNITS key, the screen displays “------”. After the sampling process is complete, put the goods on the weigh pan and the screen shows the quantity of the items.
EXCELL PRECISION CO., LTD. INTERNAL VALUE MODE (must hook up Load Cell to test) c Press TARE to enter, and the display shows internal value d Please check whether the internal value has changed obviously with weight changing. e Please check the backlight.
EXCELL PRECISION CO., LTD. Chapter 2 Advanced Functions 2-1 Advanced Function Setting Table Below is an overview of the advanced functions.
EXCELL PRECISION CO., LTD. 2-2 Advanced Function Setting Workflow In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the Advanced Function setting mode. The LCD shows .
EXCELL PRECISION CO., LTD. 2-3 General Function Setting There are 7 functions in the general function setting mode from to .
EXCELL PRECISION CO., LTD. 2-3-1 Automatic Backlight Function Setting in the General Function setting mode Select change the backlight function setting. ACTIONS to NOTE DISPLAY Press TARE key LCD displays the last status Use ON/ZERO or UNITS key to select function “on” or “off Press TARE key Key in the parameter “00” Press TARE key to complete the general setting procedures Automatic backlight function When the weight is over 10d, the display backlight will be on.
EXCELL PRECISION CO., LTD. 2-3-2 Automatic Power-off Timer Setting Select in the General Function setting mode change the automatic power-off timer setting.
EXCELL PRECISION CO., LTD. 2-3-3 Hi/Lo/OK Function Setting Select in the General Function setting mode to set the Hi/Lo/OK function. This function is available in all unit modes. In one to set the Hi/Lo/OK values. specific unit mode, enter ACTIONS NOTE DISPLAY When the high limit and low limit are both set as “0”, the Hi/Lo/OK function is disabled.
EXCELL PRECISION CO., LTD. 2-3-4 Restore to the Default Setting Select in the General Function setting mode restore to the default setting. ACTIONS DISPLAY to NOTE ON/ZERO key ⇒ Upward key (from 0 to 9) UNITS key ⇒ Downward key (from 9 to 0) Press TARE key TARE key ⇒ Move the cursor to right NET/GROSS key ⇒ Move the cursor to left.
EXCELL PRECISION CO., LTD. 2-3-5 Noise Filter Setting Select in the General Function setting mode set the noise filter setting.
EXCELL PRECISION CO., LTD. 2-3-6 Hold Function Setting Select the hold function.
EXCELL PRECISION CO., LTD.
EXCELL PRECISION CO., LTD. 2-4 Weight Calibration In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the Advanced Function setting mode. The LCD shows and use to enter the weight calibration the NET/GROSS or UNITS key to select mode. ACTIONS NOTE DISPLAY Press TARE key kg . When the digit on the right flashes, ensure that the weigh pan is empty. Then Press the TARE key.
EXCELL PRECISION CO., LTD.
