Specifications

FM/FMR ZSME300000103
18
 Command Mode
Command
Function
Command
Function
READ / RW
Weight Reading
CT
Tare Clearing
ZERO / MZ
Weight Re-zeroing
Rl
Weight Accumulation
TARE / MT
Gross Weight Deducting
Rm
Times Accumulation
NTGS
Gross / Net Switch
Rn
Date
MG
Gross Weight Indicating
Ro
Time
MN
Net Weight Indicating
AT
Weight and Times
Accumulation
DT
Weight and Times
Accumulation Clearing
 After setting the commands mentioned above, it’s a must to add the termination code
“CR (0DH) and LF (0AH)”.
 If the command is not correct, it will reply “E” + “Command Unidentified”.
 If setting command mode with address (RS1-01 = 4), add “@ address” in front of each
command.
Example: When RS1-06 = 1, for reading weight value, the whole complete command
should be “@01RW (CR) (LF)”.