Specifications

FM/FMR ZSME300000103

9-3-1 Program Version Number

7-Segment display shows program version number

XX.

9-3-2 7-segment Display Testing

7-Segment display shows to and “.”.

9-3-3 Keypad & Calibration Switch Testing

Adjust calibration switch to “ON”, and press any key, the corresponding bit will be

changed from to .

9-3-4 A/D Conversion Value

7-Segment display shows the internal value of the scale.

9-3-5 EEPROM Testing

Showing represents in normal condition.

Showing represents in abnormal condition.

9-3-6 RTC Time & Date Testing

Press key to enter the testing mode, and the screen will show date YY.MM.DD.

Example: “05.11.03” represents 3rd of November, 2005.

Press key again to show time HH.MM.SS.

Example: “09.45.50” represents 9 o’clock, 45 minutes and 50 seconds.

9-3-7 RS-232 Serial Output Interface Testing ( OP - 01 )

(1) Short Pin 2 and Pin 3 of the 9-pin D-SUB socket of serial output.

Showing represents in normal condition.

Showing represents in abnormal condition.

(2) If connected with a computer (protocol must be corresponding), the screen will show

to , which means RS-232 output is in normal condition.

ENTER