User manual

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
27
2-5-5 The selection of the Continuous Transmission Rate
Select in the RS232 serial interface setting mode
to set the Continuous Transmission Rate.
Continuous transmission rate setting
The LCD shows the last setting.
4 Default setting:
Continuous transmission rate
Use ON/ZERO or UNITS keys to select
the continuous transmission rate:
= 1 time/sec
= 2 times/sec
= 4 times/sec
= 8 times/sec
= 16 times/sec
= More than16 times/sec
ACTIONS
DISPLAY
NOTE
Press TARE key
Use the ON/ZERO or
UNITS keys to select the
continuous
transmission
rate
Press TARE key
Key in the parameter “00”
Press the TARE key to exit
RS232 serial interface
settings
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.