User manual

EXCELL PRECISION CO., LTD
SI-132 v1.1 SME300000081
28
2-5-6 Auto Transmission at Zero
Select in the RS232 serial interface setting mode
to set the Auto Transmission at Zero.
4 When the parameter is set as , the “Auto transmission” function is not
available. It is because when the zero is stable, the transmission becomes
“Continuous Transmission”.
Auto transmission at zero
Use ON/ZERO or UNITS keys to key in the
desired parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
ACTIONS
DISPLAY
NOTE
Press TARE key
Use ON/ZERO or UNITS
keys to key in the desired
parameters
Press TARE key
Key in the parameter “00”
Press the TARE key to exit
RS232 serial interface
settings
Auto transmission at zero
LCD shows the last setting
4 Default setting:
ON/ZERO key
⇒
Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.