Operation Manual

ManualsBrandsExcell ManualsPressure WasherExcell XR2600

Operation Manual

for model XR2600

Part No. A12335 Rev. 0 05/18/05

IMPORTANT

Please make certain that the person who is to use this equipment carefully

reads and understands these instructions before operating.

Pressure Washer

Table of Contents

Safety Guidelines/Definitions .................2

onsumer Saftey Information ................2

mportant Safety Instructions ..............2-5

Carton Contents ......................................6

ssembly Instructions .............................6

perating Instructions ...................... 7-11

Maintenance ..........................................12

Storage ..................................................13

Trouble Shooting Guide .................. 14-15

Warranty ................................................16

Español ............................................ 17-32

Français ........................................... 33-48

Record All Information and attach sales

receipt here for future reference:

Purchase Date:__________________________

Serial #: ________________________________

Do Not return this product to the retailer!

Questions? 1-800-888-2468

Learn more about your pressure washer,

get answers to frequently asked questions,

and register on line at

www.excellpressurewasher.com

Summary of content (16 pages)

PAGE 1
Record All Information and attach sales receipt here for future reference: Pressure Washer Operation Manual for model XR2600 Purchase Date:__________________________ Serial #: ________________________________ Do Not return this product to the retailer! Questions? 1-800-888-2468 Learn more about your pressure washer, get answers to frequently asked questions, and register on line at www.excellpressurewasher.com Table of Contents Safety Guidelines/Definitions .................
PAGE 2
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
PAGE 3
HAZARD RISK OF EXPLOSION OR FIRE (continued) WHAT CAN HAPPEN • Materials placed against or near the pressure washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials. • Mufﬂer exhaust heat can damage painted surfaces, melt any material sensitive to heat (such as siding, plastic, rubber, or vinyl), and damage live plants. HOW TO PREVENT IT • Never operate pressure washer in an area containing dry brush or weeds.
PAGE 4
HAZARD RISK TO FLUID INJECTION WHAT CAN HAPPEN HOW TO PREVENT IT • Your washer operates at ﬂuid pressures and velocities high enough to penetrate human and animal ﬂesh, which could result in amputation or other serious injury. Leaks caused by loose ﬁttings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately! • Never place hands in front of nozzle. • Direct spray away from self and others.
PAGE 5
HAZARD RISK OF UNSAFE OPERATION WHAT CAN HAPPEN HOW TO PREVENT IT • Unsafe operation of your pressure washer could lead to serious injury or death to you or others. • Do not use chlorine bleach or any other corrosive compound. • Become familiar with the operation and controls of the pressure washer. • Keep operating area clear of all persons, pets, and obstacles. • Do not operate the product when fatigued or under the inﬂuence of alcohol or drugs. Stay alert at all times.
PAGE 6
CARTON CONTENTS Operation Manual Engine Frame and Wheel Assembly Engine Manual Nozzle Cleaning Tool Chemical Hose Registration card Nozzle Holder Quick Connect Nozzles Bagged Parts Spray Gun High Pressure Hose Quick Connect Spray Wand Handle ASSEMBLY INSTRUCTIONS 1. Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place. 5.
PAGE 7
OPERATING INSTRUCTIONS Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Spray Gun High Pressure Hose Quick Connect Spray Wand High Pressure Pump (located inside the shroud) Engine BASIC ELEMENTS OF A PRESSURE WASHER BASIC ELEMENTS OF AN ENGINE High Pressure Pump (located inside the shroud): Increases the pressure of the water supply. Engine: Drives the high pressure pump.
PAGE 8
Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled. Allowing the unit to run for more than two minutes without the gun trigger pulled could cause overheating and damage to the pump. Chemical Injection System: Mixes cleaners or cleaning solvents with the water to improve cleaning effectiveness. Water Supply: All pressure washers must have a source of water. The minimum requirements for a water supply are 20 PSI and 5 gallons per minute.
PAGE 9
TO USE SPRAY WAND The nozzles for the spray wand are stored in nozzle holder on the panel assembly. Colors on the panel identify nozzle location and spray pattern. See chart to choose the correct nozzle for the job to be performed. CHANGING NOZZLES ON SPRAY WAND Risk of Flying Object could cause risk of serious injury. DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles. 1. Pull quick connect coupler back and insert nozzle. 2.
PAGE 10
HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach. To Apply chemicals: 1. Press chemical Barbed hose onto Fitting barbed ﬁtting located near high pressure hose connection of pump as shown. 2. Place other end of chemical hose with ﬁlter on it into container holding chemical/cleaning solution.
PAGE 11
8. Start engine. See Engine Owners Manual for correct procedure. NOTE: When engine rope is pulled, pressure starts building in the gun. If the engine does not start after two pulls, pull the gun trigger to relieve this pressure. 9. Depress trigger on gun to start water ﬂow. NOTE: Stand on a stable surface and grip gun/spray wand ﬁrmly with both hands. Expect the gun to kick when triggered. 10. Release trigger to stop water ﬂow. 11. Adjust nozzle spray for the task being performed.
PAGE 12
MAINTENANCE When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death! Before performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains ﬂammable fuel. DO NOT smoke or work near open ﬂames while performing maintenance. To ensure efﬁcient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed.
PAGE 13
STORAGE 5. ENGINE Consult the Engine Owners Manual for the manufacturer's recommendations for storage. PUMP The manufacturer recommends using a pump protector/winterizer, such as EXA80, when storing the unit for more than 30 days and/or when freezing temperatures are expected. If a pump protector/winterizer is not available, *RV antifreeze needs to be run through the pump as outlined in the steps below.
PAGE 14
TROUBLE SHOOTING GUIDE CAUSE PROBLEM Engine will not start (see Engine Manual for further engine troubleshooting) No or low pressure (initial use) A12335 CORRECTION No fuel. Add Fuel. Pressure builds up after two pulls on the recoil starter or after initial use. Choke lever in the "No Choke" position. Squeeze gun trigger to relieve pressure. Spark plug wire not attached. Attach spark plug wire. Engine ON/OFF switch in OFF position. Place engine ON/OFF switch in ON position.
PAGE 15
PROBLEM Will not draw chemicals No or low pressure (after period of normal use) Water leaking at gun/ spray wand connection Water leaking at pump Pump Pulsates CAUSE CORRECTION Spray wand not in low pressure. See How to Use Spray Wand paragraph in the Operation Section. Chemical filter clogged. Clean filter. Chemical screen not in cleaning solution. Make sure end of chemical hose is fully submerged into cleaning solution. Chemical too thick. Dilute chemical.
PAGE 16
LIMITED WARRANTY DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase. All products covered by this limited warranty which are used in commercial applications (i.e.