Wooden Planter Box with Universal Pole Holder Standard Size (14" x 14" x 14") EGP-HD-0478 EGP-HD-0478-WHT EGP-HD-0478-BRW Oversize (17¼" x 17¼ x 18") EGP-HD-0478-OS EGP-HD-0478-OS-WHT EGP-HD-0478-OS-BRW Thank you for purchasing from Excello Global Products! Questions? E-Mail info@excelloglobal.
INCLUDED PARTS Missing Parts? E-Mail info@excelloglobal.com or Call 1-877-969-2710 Before you throw away the box, please check that you have all the parts listed below. If any are missing, please contact our customer service at the contact above and we will gladly ship your replacement parts free of charge. Please have your order # ready to expedite the process.
ASSEMBLY INSTRUCTIONS Tools/Materials Needed: • Screwdriver (a drill or driver can help expedite the assembly process, but be careful not to overtighten the screws as wood splitting may occur) • Gravel • Potting Soil 1.
2. Screw the bottom bases to the lower side supports using the medium screws. Note: There should be a small gap between the boards – this is normal and is designed to help with drainage. 3. Slide the long bolts through the holes on two of the side supports.
4. Slide the assembly created in steps 1 and 2 on top of the bolts and all the way down. 5.
. Stack two more side boards with the long part on the bottom through the rods: 7.
8. Repeat the process one more time with boards facing long side down. 9. Screw the middle pole support board to the pole support side boards – it should fit flush with the notch.
10. Slide the board assembly created in step 9 through the rods 11. Place the bolt caps on top of the rods and tighten using the included allen wrench Questions? E-Mail info@excelloglobal.
12. Slide the metal pole support tube through the hole until it nests into the circular groove on the bottom. Then screw the flange to the support board: 13. Slide your light pole, umbrella, or other pole into the metal tube and secure by tightening the 3 screws evenly so the pole is centered. To stabilize the planter, we recommend adding gravel until it reaches the top of the support beam and then add potting soil above.
Wooden Planter Box with Universal Pole Holder Standard Size (14" x 14" x 14") EGP-HD-0478 EGP-HD-0478-WHT EGP-HD-0478-BRW Oversize (17¼" x 17¼ x 18") EGP-HD-0478-OS EGP-HD-0478-OS-WHT EGP-HD-0478-OS-BRW Questions? E-Mail info@excelloglobal.
