User's Guide

www.excelsecu.com
Ver.
1.0
4. Set Up the Printer
4.1 Inserting a Paper Roll
1. Please confirm the product you choose is automatic paper cutting or manual
paper tearing.
 Automatic paper cutting
Press the opening button on the side to open the upper cover.
 Manual paper tearing
Push the upper cover up to open it.
2. Insert a paper roll in the paper storage box.
3. Pull the end of the paper out straight,and push down both sides of the printer
cover to close.
4.2 Turn ON the Main Unit Power
1. Make sure the power switch of ESPT-100 is off,connect the included power cable
to the inlet on the backside of the ESPT-100,then connect the plug of the power
cable to the outlet.
2. Turn on the power switch of the ESPT-100,and check the POWER- LED(green)
to light up.
4.3 Connect ESPT-100 with USB
1. Download the Windows drivers on the following website:
https://www.excelsecu.com.cn, then install the drivers.
2. Make sure the power switch of ESPT-100 is off,connect the computer and
ESPT-100 with the USB type-C cable.
3. Make sure there is paper roll in ESPT-100 then turn on the power switch.
4. Open the driver installation file,the USB channel settings of the printer can be
configured and an operation test can be performed.