User guide

Chapter 2 Installation and Setup
2-4
Life|point
®
InTouch Phone User Guide
Commission a Phone
Once you have connected the Base to the network, you need to:
Associate the Base with a room and location•
Connect the handset(s) battery •
Register the handset(s) with the Base•
Note: This process typically takes from 5 to 10 minutes to complete, depending on updates.
Associate Base with a Room and Location
Perform the following steps to associate the Base with a room and location:
Verify the room number to make sure you are working in the correct room.1.
If this is the 2. rst time the phone has been connected to the network, the following screen displays.
This screen lets you enter a room number to associate the Base with the room and phone location.
On the number keypad, touch the numbers for the room you are in and touch 3. Next.
Note: If there will only be one phone in the room, skip Step 4.