User guide

Chapter 3 Placing Calls and Other Phone Tasks
3-3
Life|point
®
InTouch Phone User Guide
Placing a Call with the Cordless Handset
To place a call with the cordless handset:
Lift the handset from the Base. Either use the handset keypad to enter the number or press the 1.
desired one-touch dialing button. The number displays above the keypad.
Note: To clear a digit, press the Mute button below the number keypad. To clear the entire number,
press and hold the Mute button, or press the red phone button under the LCD display.
Press the green phone button to dial the number. As the number is dialed, the display will show 2.
either a green phone icon to indicate “off-hook” status or the icon associated with the one-touch
button that was pressed. When the call ends or is disconnected, the timer stops and displays total
elapsed time.
Adjusting Handset Call Volume
To adjust the call volume:
Use the volume button on the left side of the cordless handset to adjust the volume up or down.•
Placing a Call on Hold
When you place a call on hold, the call stays active but you and the other party cannot hear each other.
To place an active call on hold:
On the cordless handset, press the 1. Hold button.
Press 2. Hold again to take a call off hold.
Muting a Call
When you mute a call, you can hear the other party but they cannot hear you. To mute a call:
Press the 1. Mute button on the handset.
Press 2. Mute again to unmute the call.
Answering a Call
To answer a call using the cordless handset:
When a call comes in, both the handset and the Base ring. A pop-up appears on the 1. Base.
To ignore the call, touch 2. Ignore on the pop-up or press the red phone button on the handset.
To answer the call, press the green phone button on the handset. The handset displays the number 3.
of the caller.
To end the call, press the red phone button. When the call ends, the handset displays the elapsed 4.
time of the call.