Installation Instructions

Talkback

Note: You can set and view this feature using the CPS.

Priority Channel 1

This option allows you to select a channel in the scan list as

Priority Channel 1. If only Priority Channel 1 is set, 50% of a

radio's scans are on Priority Channel 1 during scanning. If

Priority Channel 2 is set as well, scans for Priority Channel 1

and Priority Channel 2 are 25% respectively.

Priority Channel 2

Note: You can set and view this option using the CPS.

Scan Delay

This option enables you to set the time that the radio will

resume scanning after the end of a valid channel activity.

This prevents the radio from resuming a scan immediately

upon the loss of activity.

Note: You can set and view this feature via the CPS.

This option allows you to select a channel as Priority

Channel 2. During scanning, 25% of a radio's scans are on

Priority Channel 2 if you have also defined Priority Channel 1.

However, if Priority Channel 1 is set to None, scans for

Priority Channel 2 will be increased to 50%.

Digital Conventional Functions and Operations

With this option enabled, your radio will transmit on the

current channel if you press the PTT key during scan stop.