Installation Instructions

Analog Conventional Functions and Operations
■
DMO and RMO
Your radio supports both DMO and RMO modes.
● DMO: You can set the Rx frequency of your radio to be
consistent with the Tx frequency using the CPS. In DMO
mode, your radio can communicate directly with another
radio.
● RMO: You can set the Rx frequency of your radio to be
different from the Tx frequency via the CPS. In this mode,
your radio can communicate with another radio of the
same frequency configuration via a repeater.
■
CTCSS/CDCSS Type
This option allows you to configure the current channel with
a specific Rx CTCSS/CDCSS type. When the radio receives
the signal, it will distinguish whether the received signal is
CTCSS or CDCSS, and check out whether it matches the
predefined CTCSS/CDCSS for the current channel before
processing.
Three types are available: CTCSS, CDCSS, and CDCSS
Invert.
CTCSS
The radio checks for CTCSS match when receiving a signal
on the current channel.
Follow the procedure below to set CTCSS/CDCSS Type to
CTCSS.
Procedure:
1. Log in to the CPS.
2. Go to “Conventional -> Channel -> Analog Channel ->
Selected Analog Channel” and set Rx/Tx CTCSS/CDCSS
Type to CTCSS.
17
Note: CDCSS is also known as DCS.