Specification

HINGES INSTALL & ADJUSTMENT

HOW TO CARRY THE TOP

OPTIONAL:

SINK INSTALLATION

OPTIONAL: TOP & BACKSPLASH INSTALLATION

1. Attach hinge (A) to door with screws (B).

2. Attach mounting plate (A) to cabinet with screw (B).

Fig. A

CAUTION

Whether you are picking up a small or

large marble countertop, always have

extra support handling the heavy object.

We recommend two adults lifting and

manuevering the countertop around.

3. Attach hinge (A) to mounting plate (B)

and snap into position.

4. Align door to cabinet. Use screw (A) to adjust

door depth, screw (B) to adjust vertically and screw

• Apply a continuous stream of silicone glue around the

sink top rim. Flip the countertop upside down.

• Carefully align the sink onto countertop back, fasten the

sink rim with the sink mounting screws.

• Apply a continuous silicone glue along the sink edges to

seal any gaps.

1. Measure the screw holes from the backside of mirror (Fig. A) distance.

Then drill the holes into the wall.

2. Insert the anchor screws into the holes and drill the screws into them.

3. Hang up the mirror into position and it’s done.

OPTIONAL: MIRROR INSTALLATION

1. Apply a continuous stream of silicone glue

around the top of the cabinet.

2. Carry the countertop and gently place it

onto the cabinet.

3. Install the backsplash by applying silicone

glue near the edge of the countertop. Then

place the backsplash onto the silicone area.

Add additional silicone onto the edges for

sealant if necessary.

Note: Allow up to 24-hours for the silicone

glue to dry before using the vanity.