Installation Guide

UNDERMOUNT SINK APPLICATION
STEP 1 - POSITION OF THE SINK
Determine where the sink will be positioned on the •
countertop.
Make sure there is sucient clearance of the sink •
on all sides below the countertop.
Carefully tape the cutting template to the •
countertop at the appropriate position (Templates
are provided only for reference, carefully measure
the actual sink dimensions).
(Figure 1
STEP 2 - CHOOSE MOUNTING OPTION
Determine which reveal you want your sink to •
have: Positive Reveal, Negative Reveal or Zero/
Flush Reveal (See Mounting Options for details).
If you want a Negative Reveal, cut the hole smaller •
than the template. For a Positive Reveal, cut the
hole slightly larger. For a Zero/Flush Reveal, cut to
the exact measurements of the template.
(Figure 2
STEP 3 - CUTTING THE COUNTERTOP
Choose the appropriate saw for the type of •
countertop material being used.
Carefully follow the predetermined reveal cutting •
outline to create the proper opening for the sink.
Always wear proper safety gear to protect yourself •
from injury.
(Figure 3
Figure 1
Figure 2
Figure 3